Manual installation instructions for Connect Tunnel VPN Client
Print
Modified on: Tue, 3 Sep, 2024 at 10:10 AM
To Install:
- Use the following link to download the Connect Tunnel client installer: https://www.sonicwall.com/products/remote-access/vpn-clients
- Once the installer has been downloaded, open it and follow the on-screen instructions.
- When everything is done installing, you'll want to look for a piece of software in your launchpad or start menu called Connect Tunnel.
Adding Configurations:
- For the Primary VPN:
- Click on the dropdown menu next to "Configuration" and then click "Add configuration".
- A new window will pop up. Name the VPN connection anything you want.
- For the server field use "sslvpn.psi.edu".
- Click apply when done.
- For the Secondary VPN:
- Repeat the above steps, but use "psivpn.psi.edu" in the server field.
To connect:
Launch connect tunnel
Select a configuration that was created in the previous step
click "Connect".
You'll be prompted for your PSI username (email address without the @psi.edu) and your PSI password.
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.
